| 冷却水回流太慢了 🇨🇳 | 🇬🇧 Cooling water reflux is too slow | ⏯ |
| 冷却塔 🇨🇳 | 🇬🇧 Cooling tower | ⏯ |
| 隔冷隔热 🇨🇳 | 🇬🇧 Cooling insulation | ⏯ |
| 散热胶 🇨🇳 | 🇬🇧 Cooling glue | ⏯ |
| 冷却水放掉里面不能有压力 🇨🇳 | 🇬🇧 There cant be pressure to let the cooling water off the inside | ⏯ |
| 冷却时间减一点 🇨🇳 | 🇬🇧 A little less cooling time | ⏯ |
| water 🇨🇳 | 🇬🇧 Water | ⏯ |
| Water 🇨🇳 | 🇬🇧 Water | ⏯ |
| 瓶口不缺料就好，缩水是冷却水的原因 🇨🇳 | 🇬🇧 Bottle mouth is not short of material is good, shrinkage is the reason for cooling water | ⏯ |
| 冷却塔是那里去 🇨🇳 | 🇬🇧 The cooling tower is where to go | ⏯ |
| 冷却水放掉里面不能有压力，才能进行敲击 🇨🇳 | 🇬🇧 There is no pressure to let the cooling water off the inside before it can be tapped | ⏯ |
| 外面的冷却水查看一下，等一会加温时把冷水机开启来 🇨🇳 | 🇬🇧 Outside the cooling water to look at, wait a while to warm the chiller to turn on | ⏯ |
| 水和水 🇨🇳 | 🇬🇧 Water and water | ⏯ |
| 小于板厚的孔，都要做冷却延时 🇨🇳 | 🇬🇧 Holes less than plate thickness, to do cooling delay | ⏯ |
| 加水 🇨🇳 | 🇬🇧 water | ⏯ |
| 水源 🇨🇳 | 🇬🇧 Water | ⏯ |
| 水 🇨🇳 | 🇬🇧 Water | ⏯ |
| 清水 🇨🇳 | 🇬🇧 Water | ⏯ |
| 打水 🇨🇳 | 🇬🇧 Water | ⏯ |